Pre-series molds
Pre-series of a few tens or hundreds of pieces, using quick silicon molds with the vacuum casting technique, to produce parts in plastic or rubber.
3D printing
Rapid prototype in short time and reasonable cost. Our stereolithography material has excellent transparency and can be used for medical applications.
Phone line
We inform customers and suppliers that we have definitively discontinued the old telephone line 0433 486300. You can therefore continue to contact us using the number 0433 40825, which you have found for some time now in all our documentation and on our web and social pages.
Discounts coming in the June newsletter!
The June newsletter is coming, with an extraordinary offer on silicone molds: 15% discount for all orders sent this month.
Guide to vacuum casting
The vacuum casting is a little known process, but very interesting in terms of quality and cost, especially if combined with 3D printing. This "Guide to vacuum casting", that we have just published, explains the process, the benefits, the costs and the possible applications of this technology.
Additive technologies and renewable energies: a new challenge
A new research project sees MarMax involved in the renewable energy sector. within the POR-FESR 2014-2020 program, azione 1.3.a, MarMax presented a research project related to «Improving the production process of hydraulic turbines through 3D printing with new materials».
Technical transparency or aesthetic transparency
Just back from vacation, we complete our series of articles on transparent models writing about the differences between technical transparency and aesthetic transparency.
How to get transparent models
This guide is intended to help you understand how transparent models can be obtained from 3D printing and vacuum castingIn this article we analyze the different characteristics of transparent parts produced through stereolithography or silicone molds.
What is transparency
This guide is intended to help you understand how transparent models can be obtained from 3D printing and vacuum casting /and, starting from the definition of the concept of transparency, provides indications on the possibilities and limits of these two solutions.
New self-extinguishing material for small series production
If you are trying to produce a small series of parts with flameproof properties, we have the right material for you.
This is the RS-00330-X: it is similar to fiber-reinforced ABS and is available in various colors. It has a VO degree of fire resistance, which means that in the standard specimen the flame is self-extinguishing in 10 seconds.